Show simple item record

Authordc.contributor.authorMalaquias, Pamela 
Authordc.contributor.authorGutiérrez Reyes, Mario 
Authordc.contributor.authorSutil, Elisama 
Authordc.contributor.authorMatos, Thalita de Paris 
Authordc.contributor.authorHanzen, Taise Alessandra 
Authordc.contributor.authorReis, Alessandra 
Authordc.contributor.authorPerdigao, Jorge 
Authordc.contributor.authorLoguercio, Alessandro Dourado 
Admission datedc.date.accessioned2021-05-27T22:08:26Z
Available datedc.date.available2021-05-27T22:08:26Z
Publication datedc.date.issued2020
Cita de ítemdc.identifier.citationJ Appl Oral Sci. 2/15 2020;28:e20200121es_ES
Identifierdc.identifier.other10.1590/1678-7757-2020-0121
Identifierdc.identifier.urihttps://repositorio.uchile.cl/handle/2250/179835
Abstractdc.description.abstractDual-cured buildup composites and simplified light-cured adhesive systems are mixed with a chemical activator to prevent the incompatibility between them. Objective: To evaluate microshear bond strength (mu SBS) and nanoleakage (NL) of three universal adhesives used under buildup composites using different curing modes, at baseline and after 6-months (6m). Methodology: Dentin specimens of 55 molars were assigned to: Clearfil Universal Bond[CFU], Prime&Bond Elect[PBE] and One Coat 7 Universal[OCU]. All-Bond Universal[ABU] and Adper Scotchbond Multi-Purpose[SMP] were used as controls. CFU, PBE, and OCU were: light-cured [LC], dual-cured using a self-curing activator [DC], and self-cured, using a self-curing activator and waiting for 20 min [SC]. Upon the application of the adhesive, transparent matrices were filled with a dual-cured buildup composite and light cured, then tested in mu SBS. For NL, the specimens were submersed in ammoniacal silver nitrate and sectioned to observe under the SEM. Three-way ANOVA and Tukey's test were applied (alpha=0.05). Results: OCU/LC-PBE/LC resulted in higher mean mu SBS than ABU/LC. For SMP/DC higher mean mu SBS were obtained than for both CFU/DC and OCU/DC (baseline). No universal adhesive was significantly affected by curing mode or storage time. CFU, PBE, and OCU did not undergo significant changes in any curing mode (p>0.05). NL (baseline) PBE/LC resulted in higher %NL compared to ABU/LC. SMP/DC resulted in higher %NL than CFU/DC-OCU/DC. CFU/LC/DC resulted in lower %NL than CFU/SC. PBE/SC resulted in lower %NL than PBE/DC. OCU/LC/SC showed lower %NL than OCU/DC. OCU showed significant lower %NL than CFU and PBE. All CFU groups, as well as OCU/SC, resulted in increased %NL at 6m when compared with baseline. Conclusion: For universal adhesives used in etch-and-rinse mode, self-cured activator and different curing modes did not influence mu SBS. However, some interactions were observed for NL, but this influence was material-specific.es_ES
Publisherdc.publisherUniv. Sao Pauloes_ES
Type of licensedc.rightsAttribution-NonCommercial-NoDerivs 3.0 Chile*
Link to Licensedc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/cl/*
Sourcedc.sourceJournal of Applied Oral Sciencees_ES
Keywordsdc.subjectSelf-Curing of Dental Resinses_ES
Keywordsdc.subjectAdhesivees_ES
Keywordsdc.subjectShear Strengthes_ES
Keywordsdc.subjectDental Leakagees_ES
Títulodc.titleUniversal adhesives and dual-cured core buildup composite material: adhesive propertieses_ES
Document typedc.typeArtículo de revistaes_ES
dcterms.accessRightsdcterms.accessRightsAcceso Abierto
Catalogueruchile.catalogadorcrbes_ES
Indexationuchile.indexArtículo de publicación ISI
Indexationuchile.indexArtículo de publicación SCOPUS
Indexationuchile.indexArtículo de publicación SCIELO


Files in this item

Icon

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Chile
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 Chile